Fix a Flashdisk Problem Need to Format (RAW) Using Command Prompt (CMD)

A flashdisk need to format because some of the causes, like :
1. A hardware fault
2. Viruses
3. Need maintenace

From of the three, the no. 1 is cannot fix by the computer but no. 2 and 3 may fix using some methode, one of the methode is use the function on CMD.
There are 2 methode fix flashdisk need format using CMD that is :
Use Format function on CMD

1. Use commnd "format"
- first plug the flash on computer
- look the flash drive on  --- example drive (H:)
- open Commnd Prompt (CMD)
- type command "format [drive location]" ---- ex. drive location on H: then type format H: (look at pics below)
- click Enter then wait the process completed
- The flash will be formated to FAT32 type
- After completed please unplug flashdisk then plug again

2. Use command "CHDSK"
- first plug the flash on computer
- look the flash drive on  --- example drive (H:)
- open Commnd Prompt (CMD)
- type command "CHDSK [drive location] /R" ---- ex. drive location on H: then type CHDSK H: /R (look at pics below)

note :
> /R use if you want format + repair
> /F use if you want format only

- click Enter then wait the process completed
- The flash will be formated to FAT32 type
- After completed please unplug flashdisk then plug again

Hope the flash could be fixed

Thanks